Jenn-Air SCE4320 Range User Manual


 
5. Set clock controls to clean oven using one of the following procedures:
To set oven to start cleaning immediately:
An automatic program of 2 1/2hours ispre-set for an average soiled oven. For a
heavily soiled oven, program can be extended up to 4 hours.
a. Push ENTER button to enter start time.
The indicator words STOPTIME will appear in Display and the time will be 2
1/2 hours laterthan time of day.
b. Foranaveragesoiledoven: PushENTERbuttontoenterstoptime. Theoven
will beep and indicator word AUTO will appear and remain in the Display
Window.
Fora heavily soiled oven: Turn SETdial inclockwisedirection todesired time
(maximum 4 hour clean cycle). Push ENTER button to enter stop time. The
oven will beepand theindicator wordAUTO will appear and remain in Display
Window.
To set oven to start cleaning at a later time:
An automatic program of 2 1/2hours is pre-set for an average soiled oven. For a
heavily soiled oven, program can be extended up to 4 hours.
a. Turn SET dial to desired start time.
b. Push ENTER button to enter STARTTIME. The indicator words STOP TIME
will appear in Displayand the time will be 2 1/2 hours laterthan the start time.
c. For an average soiled oven: PushENTER button to enterstop time. Theoven
will beep and the word AUTO will blink. When start time is reached, the oven
willbeepand theword AUTO willremain in Display Window during thecleaning
cycle.
For aheavily soiled oven: Turn setdial inaclockwise directionto desired time
(maximum4 hourscleaning cycle). PushENTER buttontoenter stop time. The
ovenwill beep and the word AUTO will blink. When start time is reached, the
oven will beep and the word AUTO will remain in Display Window during the
cleaning process.
6. The oven CLEAN INDICATOR LIGHT will glow when all steps are completed
properly, except when set for a delayed start. The light goes off when stop time is
reached.
33