Jenn-Air SCE4340 Range User Manual


 
To check START TIME before cooking begins: Hold inSTARTTIME button
until the words START TIME appear in the Display Window. The start time will be
displayed briefly, then Display will return to time of day.
To change START TIME before cooking begins:
1. Hold in START TIME button until the words START TIME appear in the Display
Window.
2. Turn SET dial to desired time.
3. Push ENTER button twice to enter new start time and stop time previously
programmed.
To check STOP TIME: Hold in STOP TIME button until the words STOP TIME
appear inthe Display Window. The stop time will be displayed briefly, then Display will
return to on-going program.
To change STOP TIME:
1. Hold in STOP TIME button until the words STOP TIME appear in the Display
Window.
2. Turn SET dial to desired time.
3. Push ENTER button to enter stop time.
To Cancel function programmed: Push CANCEL button twice to cancel
function, during programmed time or after time has expired.
NOTE: After clock-controlled baking, turn SELECTOR and TEMPERATURE knobs to
OFF position.
NOTE: Since food continues to cook if left in the oven, itis suggested that the clock
controls be used primarily to start the oven when no one is in the kitchen.
Provisionsshould be made to have thefood removed as soon asthe signal has
sounded.
NOTE: If more than 7 seconds elapses between holding in STARTTIME button
or STOP TIME button and turning the SET dial, the display window will
automatically return to on-going program.
NOTE: If morethan 1minute elapses between turning SETdial toa new time and
entering new START TIME and STOP TIME, the entire program will be
cancelled and display will return to time of day clock.
19