Filter
Top Products
Other Hints on Caring for
Your Range
Oven Light Bulb
Beforereplacing bulb, disconnect power tooven atthe main fuse orcircuitbreaker panel.
Be sure that the entire oven cavity including the light bulb is cool before attempting to
remove.
To replace light bulb: _._, _, ]
1. Carefully remove the glass light lens and lens retainer by
removing thetwo screws inthe light lens retainer usinga
phillipsscrewdriver. Note: The lightlens is separate from
the light lens retainer. The two pieces willdrop down into
your hands at the same time. Do NOT remove the
remaining two screws.
I\\ \\ I
2. To obtain firm grasp on bulb, wear protective rubber __ I
gloves. Remove by turning bulb to the left. Do not touch
a hot oven light bulb witha damp cloth as bulb willbreak.
NOTE: Ifthe bulb does break and you wish to remove it,
becertain power supply is disconnected and wear protec-
tive gloves. You may contact your authorized Jenn-Air
Service Contractor for service.
3. Replace bulb with a 40 watt oven-rated appliance bulb. Bulb with brass base is
recommended to prevent fusing of bulb into socket.
4. Placelightlens inside of light lensretainer. Holding the lightlens and lens retainer
in place, insert the two screws into the light lens retainer and tighten.
Oven Racks \
_'O rem°ve PUll f°_ward t° the Hst°pn P°siti°n; _ _fi
lift up on the front of the rack and pull out. _ ___/_
_ o _ _
40