Jenn-Air SCE4340 Range User Manual


 
7. The cleaning process begins immediately unless the self-cleaning process has
been set foradelayed start. When the oven temperature reaches550°F, the LOCK
INDICATOR LIGHT will glowand the doorcannot be opened until the temperature
drops below 550°F. DO NOT TRY TO UNLOCK THE DOOR WHILE LOCK
INDICATOR LIGHT ISON. The normal cleaning process takes the time selected
on the clock plus about 45 minutes for the oven to cool down before the LOCK
INDICATOR LIGHT goes out and the door can be opened.
8. At the end of time set, oven will stop automatically and not beep.
9. After the LOCK INDICATOR LIGHT goes out, move the DOOR LOCK LEVER to
the left. The oven door can now be opened.
10. Turn the SELECTOR AND TEMPERATURE knobs from CLEAN to OFF after the
door is unlocked.
IMPORTANT: IFTHETEMPERATURE KNOB ISTURNEDTO OFF BEFORETHE
DOORISUNLOCKED, THEDOOR WILLNOTOPEN. Forcingthelockwilldamage
the lock mechanism. Return TEMPERATURE knob to CLEAN, unlock the door,
then turn TEMPERATURE knob OFF.
NOTE: Afancomesonwhenever the SELECTORknob isseton CLEAN;therefore,
the fan will continue to operate at the end of the cleaning process until the
SELECTORknob is turned OFF. The fanwill also start as soon as the controls are
set for a delayed start of the self-cleaning process.
To check START TIME before cleaning begins: Hold in START TIME
button untilthe words START TIME appear in the Display Window. The start time will
be displayed briefly, then Display will return to time of day.
To change START TIME before cleaning begins:
1. Hold in START TIME button until the words START TIME appear in the Display
Window.
2. Turn SET dial to time desired.
3. Push ENTER button to enter new start time.
Theindicatorwords STOPTIMEand anew stoptime willappear in DisplayWindow.
The new stop time will be 2 1/2 hours later than the new start time.
Fora heavily soiled oven, the stop time will need tobe changed byturning the SET
dial.
4. Push ENTER button to enter new stop time.
34