INSTALLATION
8
To Remove:
1. Release top door trim (select models)
by removing Phillips screws from top
of fresh food door and retain screws
for later use.
2. Grasp handle firmly with both
hands. Slide handle upward
approximately
3
⁄4” to release.
3. Repeat instructions 1-2 to
remove other handle.
To Reinstall:
1. Repeat in reverse order.
Euro Handles
This handle style is installed at the factory.
Materials Needed:
•
3
⁄32” Allen wrench
To Remove:
• Remove set screw from
handle mounting post
using
3
⁄3
2
” Allen wrench.
• Repeat the procedure on
all posts to remove the
handle.
To Replace:
• Align handle with the mounting posts.
•
F
ully tighten all set screws to secure handle
in place.
To Remove:
• Loosen set screws in handle using
3
⁄3
2
” Allen
wrench.
• Repeat the procedure on all screws.
To Replace:
• Align handle with the mounting posts.
• Apply upward pressure to the handle and hold.
• Fully tighten all set screws to secure handle in
place.
Metal Handle
Materials Needed:
•
3
⁄3
2
” Allen wrench
• Gloves to protect hands
Note: Metal handles can scratch doors.