Filter
Top Products
Cutout dimensions
/ WARNING
34t/,°rain.
l 187cm)
ElectricalShockHazard
18"min. Plugintoa grounded3 prongoutlet.
(4s.7cm) Donotremovegroundprong.
24" min. I
161_ _ DOnotuseanadapter.
Failuretofollowtheseinstructionscan resultin
15'_"min. death,fire,orelectricalshock.
I_ (38.7cm) _
1.Groundedelectricaloutletmustbeaminimumof Recommended Grounding Method
3 in.(7.6cm)awayfromsurroundingcabinetsor Thiscompactorisforuseon asinglephase,115-volt,60 Hz,A
nearbywallsasshown./tcanbeplacedeitherto onJy15or20 amperefusedandproperlygroundedcircuitand i
the/eftortherightsideof theproduct, equippedwitha groundingplugasshownbelow.Timedelayfu_
orcircuit breakeris recommended.It isrecommendedthata
Clearance dimensions separatecircuitservingonlythisappliancebe provided.Inthe
eventofanelectricalshortcircuit,groundingreducesthe risko
electricshock by providingan escape wire for the electTic
current. Donot modify the plug attachedto the compactor; use
onlywith a grounded receptacle.
Thiscompactor must be groundedwhile inuseto reducethe ri_
ofelectric shock. Thecompactor is equipped with a three-
conductorcord and three-prong grounding-type plug to fit the
propergrounding-typereceptacle.Thegreen (orgreen and
yellow)conductor in the cord Is thegrounding wire. Never
connectthe green(orgreenandyellow)wire to a liveterminal.
', Theoutlet should be properlyinstalled and grounded in
2..........i ---_ _ accordancewith the NationalElectricalCodeand Local codes
................ andordinances.Noadaptershould be used with this applianc_
1
1.Leave6in. (15.2cm)of clearancespaceto the _'=_;_'_'_"_ _'"_'_ _ _.;,C_i_
rightsideofthecompactorinordertoremovethe NOTE:Properinstallationisyourresponsibility.Makesureyou
compactorbags. haveeverythingnecessaryfor correctinstallation.Itisthe
2.Leave23in. (58.4cm)ofclearanceinfrontof the personalresponsibilityandobligationof thecustomerto cont_
compactorinorderto fullyopenorremovethe a qualifiedinstallerto assurethat electricalinstallationmeets
compactordrawer, nationaland local codes and ordinances.
Toolsand materialsneededfor installation:
Level Scissors _ in. Hex-Hea
TapeMeasure PhillipsNo.2 Screwdriver SocketWrench
Pliers Flat-HeadScrewdriver Utility Knife
IMPORTANT:
• Do notgrasp control panelto movecompactor.
• Slidecompactor onto cardboardor hardboardbefore
movingcompactoracrossfloortopreventdamagingfk
covering.
• Donotallowthe rearframe ofthecompactorto touch1
floor coveringwhen lifting or movingcompactor.