Filter
Top Products
12
4. Draw and cut a 6¼" (15.8 cm) diameter hole (option 1 shown).
5. Position blower motor in cabinet opening and mount blower
motor to the floor.
6. Connect vent system to blower motor outlet (option 1 shown)
with 4 - #8 x ¾" hex head screws provided.
7. Go to the “Electrical Connection” section.
Left or Right Side Venting
1. Mark cabinet side for either a left or right side vent hole
location.
2. Mark and cut a 5½" (13.9 cm) diameter hole in the desired
cabinet side.
3. Mark and cut a 14" x 11" (35.6 x 27.9 cm) opening in the floor
of the same cabinet as the vent hole opening.
A.Option 1
B.Option 2
Top View
Option 1 Option 2
A.Inlet from range
B.Exhaust outlet
A.Inlet
B.Vent clamp
C.Floor
D.Vent system
A
B
A
A
B
B
A
B
C
D
A.31
³⁄₁₆
" (79.2 cm) to top of cabinet
B.18" (45.7 cm) from back wall
A.5½" (13.9 cm) diameter hole
Top View
A.11" (27.9 cm) from front of cabinet
B.14" (35.6 cm) from left side of cabinet
A
B
A
A
B