Filter
Top Products
21
10. Depending on your installation, connect the flexible vent from
the blower motor inlet to the range using a vent clamp.
Wall Venting
Floor Venting
Side Venting (left side venting shown)
Connect flexible vent duct to range and connect vent system
to blower motor outlet.
Verify Anti-Tip Is Installed and Engaged
1. Verify the anti-tip bracket is installed and engaged.
■ Use a flashlight to look underneath the bottom of the
range.
■ Visually check that the rear foot is inserted into the slot of
the anti-tip bracket.
2. Replace access panel.
Top View
A.Range
B.Wall venting outlet
C.Vent clamp
Top View
A.Range
B.Floor venting outlet
C.Vent clamp
A
B
C
C
A
B
Top View
A.Flexible vent duct to range
B.Vent clamp
C.Range
D.Vent system
E.Side venting outlet
B
E
C
A
D
el
.