Filter
Top Products
.
To set oven to start at future time and shut off automatically
l-4. Follow preceding Steps
l-4,
on page 12.
5.
Touch
Stop Time Pad.
Indicator Words STOP and TIME will flash. Display will show the calculated
stop time based on current time of day and cook time.
Note
WW30430 Owners:
The appropriate letter (U - upper oven; L - lower oven) and OVEN will also flash.
6. Touch the appropriate number pads to enter desired stop time.
A stop time can only be accepted for later in the day.
Note:
Since food continues
to cook if left in the oven, it is suggested that the clock controls be used primarily
to start the oven when no one is in the kitchen.
Provisions should be made to have
the food removed as soon as the chime has sounded.
Example:
If at 10 o’clock you set the oven for 350” convection baking and 2 hours
and 30 minutes cooking time, the calculated stop time would be “12:30”. The
Display would show:
If you want the stop time to be 1 o’clock, touch the number pads “1 ,O,O”. Five
seconds later, the Display will briefly show the start time:
After five seconds, the display will return to current time of day, thus showing:
At the end of the delayed period, the DELAY Indicator Word will go off and the oven
will begin to heat. 100” will be shown. As the oven heats, the Display will show
a rise in increments of 5” until programmed temperature is reached.
At the end of programmed Cook Time, the oven will shut off automatically and a
“chime” will be heard four times and “End” will appear in the Display. If oven is
not cancelled, “End” will remain in the Display and there will be one chime every
minute for ten minutes.
IMPORTANT
0
Note
WW30430
Owners:
Clock controlled baking can be used with only one oven
at a time. To program, first set the bake or convect bake or convect roast function
for the desired oven, then set the cook time. If one oven is set for clock controlled
baking, the other oven cannot be set to self-clean.
0 To recall time function programmed:
Touch the appropriate time pad.
0 To cancel timed function only:
Hold
Cook Time Pad
for four seconds. This will
only cancel cook time and stop time, not programmed bake mode.
0 If more than five seconds elapse between touching a function pad and touching
appropriate number pads, the oven is not set and Display will return to previous
Display.
13