Jenn-Air w30400 Convection Oven User Manual


 
4. Touch
Bake Pad
or
Convect Bake Pad
or
Convect Roast Pad.
Indicator Words BAKE or CONV BAKE or CONV ROAST will flash and Display
will show three dashes.
5. Touch the appropriate number pads for desired oven temperature.
Example:
If at 10 o’clock you set the oven for a probe temperature and to
convection roast at 325O, after five seconds the Display will shpw:
When selected temperature has been reached, the oven will shut off and a chime
will sound four times. Plus, the actual probe temperature will flash and the word
“End” will be in the Display. These words will remain in the Display and a chime
will sound every minute for ten minutes or until the
Cancel Off Pad
is touched. If
the probe is not removed, a beep will sound continuously until the probe is
removed.
Note:
Once selected internal temperature has been reached, unplug the probe
from the oven and remove food immediately to prevent overcooking. Hold plug
with ootholder when removina from the oven.
Important:
The probe must be unplugged and removed from oven when it is not
being used. If probe is left plugged fn oven and Probe feature is not programmed,
a beep will sound continuously and PROBE will flash continuously.
To use Probe feature to start at future time and shut off
automatically
IMPORTANT:&tJ
estimated cook time and stop time must be set or oven will
start immediately. Therefore, follow all nine steps.
1-5. Follow preceding steps
I-5
on pages 22-23.
6. Touch
Cook Time Pad.
Indicator Words COOK TIME will flash and Display will show “0 HR :OO”.
Note WW30430 Owners:
The appropriate letter (U-upper oven; L-lower oven)
and OVEN will also flash.
7. Touch the appropriate number pads
to enter cooking hours in 5 minute
increments.
Hours are to left of colon and minutes to right of colon.
(Allowable range is 5 minutes to 11 hours and 55 minutes.)
Example:
If cooking time selected for the oven is 2 hours and 30 minutes, the
Display will show:
23