Filter
Top Products
After 3 seconds the Display will show probe temperature or 095 °, whichever is
higher. Indicator Words CONV and BAKE will flash.
I ,0
I .LILt = .,,
6. Touch Bake Pad or Convection Bake Pad.
Indicator Words BAKE or CONV BAKE will flash and Display will show 3 dashes.
7. Turn Set Dial until desired oven temperature appears in the Display.
Ifthe SetDial is turned one click, 325° will be shown.The Set Dial can beturned in
either direction until the desired temperature appears in the Display.
EXAMPLE: Ifat 10o'clock youset the oven fora probe temperature and to convect
bake at 350°, after 3 seconds the Display will show:
I i .mmioqs °
ILl. till =, ;,
When selected temperature has been reached, theoven will shut off and the signal
will beep 3 times. Ifthe probe is not removed, the actual probe temperature will be
in the Display.The temperature will flash and thesignal will beep continuously until
the probe is removed.
NOTE: Once selected internal temperature has been reached, unplug the probe
from the ovenand removefood immediately to prevent overcooking. Hold plug with
potholder.
IMPORTANT: The probe must be unplugged and removed from ovenwhen it isnot
being used. If probe is left plugged in oven and Probe feature is not programmed,
the signal will beep and temperature will flash continuously. Be sure metal cover is
over receptacle when Probe feature is not being used.
To recall oven temperature selected: Touch the appropriate Bake Pad. The
temperature will be displayed briefly before returning to probe temperature.
To change oven temperature set: Touch appropriate pad and turn Set Dialto new
desiredtemperature.
To use Probe feature to start at future time and shut off automatically:
IMPORTANT: Both estimated cooktime and stop time must be set or oven will start
immediately. Therefore, follow all nine steps.
1. Insertprobe.
2. Touch Probe Pad.
3. Turn Set Dialto desired temperature.
4. Touch Bake Pad or Convection Bake Pad.
5. Turn Set Dialto desired temperature.
6. Touch CookTime Pad.
Indicator Words OVEN and TIME will flash and Display will show "0 HR :00".
NOTE WW2780 OWNERS: The appropriate number (1-upper oven; 2-lower oven)
will also flash.
7. Turn Set Dialto enter cooking hours in5 minute increments.
Hours are to left of colon and minute to right of colon.
(Allowable range is 5 minutes to 11 hours and 50 minutes.)
23