Filter
Top Products
10
Residual heat indicator
1 Warning! Risk of burns from residual heat. After
being switched off, the cooking zones need some
time to cool down. Look at the residual heat indica-
tor
h .
3 Residual heat can be used for melting and keeping
food warm.
Switching the appliance on and off
Selecting the cooking zone
3 The decimal point is displayed by the selected cook-
ing zone. Then a heat setting must be set for this
cooking zone within 6 seconds, otherwise it must be
re-selected.
Selecting the heat setting
3 After selecting the cooking zone, briefly release the
sensor field .
3 After 6 seconds with no input the selection is can-
celled and the decimal point goes out. To set the re-
quired cooking zone again, make another selection.
Control panel Display
Switch on Touch for 2 seconds
¾ / Decimal point flashes
Switch off Touch for 1 second
h / none
Control panel Display
Select Touch
¾ Decimal point illuminates
Control panel Display
Increase Touch
¾ to Ç
Decrease Touch
Ç to ¾
Switch off Touch and at the same time
¾