Filter
Top Products
11
Using the child safety device
The child safety device prevents unintentional use of the ap-
pliance.
Setting the child safety device
3To override the child safety device or switch it off
successfully, the steps must be performed immediately
one after the other.
No other sensor fields must be touched between the
steps described. If the steps are performed in the
wrong order, the display automatically switches itself
off.
Overriding the child safety lock
The child safety device can be released in this way for a sin-
gle cooking session; it remains activated afterwards.
Cancelling the child safety device
Step Control panel Display
1. Switch on appliance (Do not set a heat setting)
¾ / h (if hot)
2.
Touch of the front right cooking zone and at
the same time
4 x
¾ or h
Decimal points flash
3. Touch of the front right cooking zone l
Appliance switches off.
Step Control panel Display
1.
Switch on the appliance l / h (if hot)
2.
Touch of the front right cooking zone and at
the same time
4 x
¾ Decimal points flash
Until the appliance is next switched off, it can be used as normal.
Step Control panel Display
1. Switch on the appliance
l / h (if hot)
2.
Touch of the front right cooking zone and at
the same time
4 x
¾ or h
Decimal points flash
3. Touch
Appliance switches off.