Filter
Top Products
• To place the appliance into the cabinet
follow the procedure:
Important! Two people will be required to
carry out the lifting procedure.
Warning! Warning: Do not attempt
to lift this appliance by the handle(s).
• Each person should squat either side of the
appliance.
• Tilt the appliance so that your hands can
support the underside of the appliance.
• Keeping your back straight, raise the
appliance to the correct height by
straightening at the knees.
• Rest the rear underside of the appliance on
the cabinet floor while your hands support
the front.
• The appliance can be pushed fully into the
cabinet. Take care to avoid fouling the
mains lead.
• Ensure the appliance is central and level.
• Do not remove spacers fitted behind fixing
holes.
• When the appliance is fully housed screw
the stability screws (supplied with the
appliance) into the side of the cabinet taking
care not to distort the side trims. It is
advisable to turn each screw alternatively
to avoid damaging the trims. Fixing point for
stability screws
Fixing point
for stability
screws
• Switch on the appliance then refer to the
operating instructions.
Technical data
Voltage: 230-240 Volts, AC 50Hz
Wattage: 5.9 - 6.4 kW
Height: 900mm
Width: 600mm
Depth: (excluding handles and knobs) 600mm
Weight 55kg
This appliance complies with:
European Council Directive 73/23/
EEC
EMC Directive 89/336/EEC CE
Marking Directive 93/68/EEC
Energy Label Directive 2002/40/EC
46