John Lewis JLBIOS607 Microwave Oven User Manual


 
46
Installation instructions
1
Attention:
The appliance must be in-
stalled according to the instructions.
The installation must be undertaken by
a qualified engineer according to the
relevant British Standards.
Any damage resulting from improper
repairs is not covered by the warranty.
1
Safety information for
the installer
The electrical installation is to be set up so
that the appliance can be isolated from the
mains with a minimum 3mm all-pole contact
separation.
Suitable separation devices include e.g. cut-
outs, fuses (screw fuses are to be taken out
of the holder), RCD’s and contactors.
Anti-shock protection must be provided by
the installation.
The built-in unit must meet the stability re-
quirements of DIN 68930.
Built-in ovens and built-in cooking surfaces
are fitted with special connection systems.
For safety reasons, they must only be com-
bined with appliances from the same manu-
facturer.