Filter
Top Products
12
To start the freez er and setting
the cor r ect temperatur e
Switching on:
Switch on the freezer by pressing the power switch.
The alarm sounds if the temperature inside the freezer
reaches room temperature. Turn off the alarm by
pressing the switch-off button.
Setting the temperature
Press the buttons until the desired temperature blinks on
the temperature display. (The temperature can be set
between -15°C and -24°C.)
"+" increases the temperature.
"-" decreases the temperature.
Once set, the temperature display shows the current
temperature inside the freezer.
Allow the freezer to run for a period of 24 hours
whenever the temperature setting is changed. This will
allow the temperature to stabilise inside the freezer.
It is not necessary to reset the temperature when the
freezer is switched on after it has been out of use. The
thermostat recalls the previously set temperature.
Temperature inside the freezer
To ensure that foodstuff will keep for a long time, be
sure that the temperature inside the freezer is -18°C or
below. Please note, however, that the energy
consumption increases as the temperature decreases.
The built-in temperature display shows the warmest
temperature inside the freezer. If the temperature is
measured using a thermometer, put it between the
products since this will reflect the real temperature in
the frozen products. It is normal that the built-in
temperature display shows a temperature slightly above
that measured in other ways.
Alarms and other features
Door open alarm
If the door remains open for more than about 1,5
minute, the red indicator lamp starts flashing and you will
hear an audible alarm sound.
To switch off the alarm:
Press the alarm shut-off button. As long as the door
remains open, the audible alarm will repeat at 1-minute
intervals. The red indicator lamp goes out when the door
is closed.
ACTIONFREEZE
*
-- 1 8
ACTIONFREEZE
*
20
ACTIONFREEZE
*
-- 1 8
ACTIONFREEZE
*
-- 1 8
Using the freezer