Filter
Top Products
8
Door Reversal
1. Close the freezer and remove the plug from the
electrical socket.
2. Remove the ventilation grill. There is a part on the grill
that can be removed. Remove and reposition it on the
other side.
3. Put the fridge on a wooden board when it is laid down.
Later, when raising the fridge, it will be easier to grip
under the fridge thanks to the board.
4. On the upper part of the freezer. Put the hinge pin on
the other side.
5. On the lower part of the freezer.
a. Unscrew the hinge.
b. Remove the door-closing fittings from the hinge and
put the hinge pin on the other side. Then attach the
supplied door-closing fitting.
6. a. Remove the door-closing fitting from the bottom of
the door.
b. Then secure the supplied door-closing fitting on the
other side.
c. Secure the lower hinge.
Remove any play in the door by adjusting the height of
the lower hinge with the supplied spanner. Secure with
the lock-nut.
7. Raise the freezer and replace the ventilation grill.
8. To transfer the handle.
Unscrew the screws. Fit the handle onto the opposite
side by turning it one half circle. Press the supplied plastic
plugs into the holes to which the handle was previously
fitted.
9. Put the freezer in position. Check that the appliance is
level. See the section "Installing the cabinet".
1
2
3
4
5b
5a
a
b
c
6
8