Filter
Top Products
14
1 Preparing and using for the first time
T Place a receptacle under the dual spout.
k T Press the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display. Your GIGA is ready for use.
T Press the
‘Inactive’ button.
k T Press the Rotary Switch.
‘Water hardness’
E If you do not know the hardness of your water, you must find
this out first (see Chapter 1 ‘Preparing and using for the first
time – Determining the water hardness’).
T Press the
‘+’ or ‘–’ button to adjust the water hardness.
T Press the
‘Save’ button.
‘Saved’ appears briefly on the display.
‘Machine is heating.’, ‘Press the Rotary Switch.’.
k T Press the Rotary Switch.
‘System is filling.’, the system fills up with water. The opera-
tion stops automatically.
T Place a receptacle under the dual spout.
k T Press the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display. Your GIGA is ready for use.
The following settings can only be made by the JURA service techni-
cian:
U
Customised layout of the products on the start screen (dis-
play) or in the product selector
U
Disabling the product selector view (see Chapter 2 ‘Prepara-
tion – Preparation using the product selector’)
U
Codes: Four codes can be assigned. For each code, you can
define which programme items are available or disabled. Each
Deactivating the filter
Settings by the JURA
service technician