Filter
Top Products
41
5 Maintenance
Depending on the setting in programming mode, the GIGA prompts
you to rinse the milk system or automatically performs rinsing fol-
lowing milk preparation.
Example: Proceed as follows to rinse the milk system when
prompted to do so.
Precondition:
‘Rinse the milk system.’ and the c symbol are dis-
played.
T Place a receptacle under the dual spout.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Rinse the milk system’ button.
‘Milk system is being rinsed.’, water flows out of the dual
spout.
The rinse stops automatically.
‘Please select product:’
appears on the display.
To ensure that the milk system in the dual spout always works prop-
erly, you must clean it daily when you have been preparing milk. The
GIGA will not prompt you to clean the milk system.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
E JURA Cappuccino Cleaner is available from specialised dealers.
Precondition:
‘Please select product:’ is displayed.
O T Press the P button.
‘Maintenance status (1/5)’
T Press the ‘Clean the milk system’ button.
T Press the
‘Start’ button.
T Press the
‘Start’ button again.
‘Cleaning agent for milk system.’
T Pour 250ml of fresh water into a receptacle and add one
capful of Cappuccino Cleaner.
T Immerse the milk pipe in the receptacle.
Rinsing the milk system
Cleaning the milk system
CAUTION