Filter
Top Products
24
3 Daily operation
3 Daily operation
When the GIGA is switched on, it automatically prompts you to
perform the rinse operation. Start the rinse operation by pressing
the Rotary Switchk. In programming mode you can change this
setting so that the machine starts the switch-on rinse automatically
(see Chapter 4 ‘Permanent settings in programming mode – Main-
tenance settings’).
Precondition:Your GIGA is switched on at the power switch.
T Place a receptacle under the dual spout.
Q T Press the On/Off button to switch the GIGA on.
‘Welcome to JURA’ appears on the display. The machine
heats up.
‘Press the Rotary Switch.’
k T Press the Rotary Switch.
‘Machine is rinsing.’, the machine rinses. The operation
stops automatically.
‘Please select product:’ appears on the
display.
To ensure that you get many years of reliable service out of your
GIGA and to guarantee the optimum coffee quality, the machine
requires daily maintenance.
T Pull out the drip tray.
T Empty the coffee grounds container and the drip tray. Rinse
them both with warm water.
T Dry the metal contacts on the back of the drip tray.
T Refit the coffee grounds container and the drip tray.
T Rinse the water tank with clean water.
T Dismantle and rinse the dual spout (see Chapter 5 ‘Mainte-
nance – Dismantling and rinsing the dual spout’).
T Wipe the surface of the machine with a clean, soft, damp
cloth (e.g. microfibre cloth).
E In the interests of hygiene, we recommend changing the milk
pipe on a regular basis (approx. every 6 months). Replacement
pipes are available from specialised dealers.
Switching on
Daily maintenance