Jura Capresso F90/F9 Coffeemaker User Manual


 
17
Use the symbols to select the hours and confirm by
pressing .
Use symbols to adjust the minutes and confirm by
pressing . The switch-on time is now programmed.
Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.11 Programming the automatic switch-off time
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can
programme the switch-off time in a range between 0.5 and 9
hours, or select –:– (i.e. function switched off).
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING:
PLEASE SELECT
Press programming key until you hear an acoustic signal.
Press symbol until the following message is displayed:
OFF AFTER 5.0 HOURS
Press symbol , you will hear an acoustic signal and 5.0
flashes.
Use the symbols to select the hours and confirm by
pressing .
Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.12 Cup counter
This function is available with the following products:
In Aroma Select via symbols , , and via the pre-
ground coffee draw-off key , draw-off key for 1 cup
and draw-off key for 2 cups .
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press programming key until you hear an acoustic signal.
Press symbol until the following message is displayed:
DRAW OFFS ....... (Total number of draw offs)
To learn how often a function was selected, press the cor-
responding key or symbol.
Use the symbols to reach the next programming stage or
press programming key to quit Programming Mode.
13.13 Programming the language
Use the key to switch on the coffee machine.
WWW. IMPRESSA-F-LINE.COM
HELLO, MACHINE HEATING UP
PRESS MAINTENANCE
MACHINE RINSING
PLEASE SELECT
Press programming key until you hear an acoustic signal.
Press symbol until the following message is displayed:
SPRACHE DEUTSCH
E