18
Ⅲ Press symbol , you will hear an acoustic signal and
DEUTSCH flashes.
Ⅲ Press symbols to select the required language.
Ⅲ Press symbol to save the new settings.
Ⅲ LANGUAGE ENGLISH
Ⅲ Use the symbols to reach the next programming stage or press
programming key to quit Programming Mode.
13.14 Connectivity
With the Connectivity system it is possible for your IMPRESSA
F90 to communicate with your PC and the Internet. To use this
feature, you will need a kit which you can order at www.impressa-
f-Line.com or your local authorized dealer. Available as an
optional extra.
14. Maintenance
14.1 Refilling water
Ⅲ REFILL WATER
Ⅲ If this information is displayed, drawing off products is no
longer possible. Refill water as described in Chapter 3.3.
Ⅲ PLEASE SELECT
The water tank should be rinsed daily and refilled with fresh
water. Only fill in fresh, cold water. Never fill in milk,
mineral water or other liquids.
14.2 Emptying the coffee grounds container
Ⅲ EMPTY COFFEE GROUNDS CONTAINER
Ⅲ If this information is displayed, drawing off products is no
longer possible and the coffee grounds container must be
emptied (Fig.8 ).
Your coffee machine must be switched on.
Ⅲ Carefully take out the drip tray, it is filled with water.
Ⅲ NO TRAY
Ⅲ PLEASE SELECT
The red water level warning message appears when the
coffee drip tray is full.
14.3 No Drip tray
Ⅲ NO TRAY
Ⅲ If this information is displayed, the drip tray is not installed
properly or was not installed at all.
Ⅲ PLEASE SELECT
14.4 Filling the bean tank
Ⅲ REFILL BEANS
Ⅲ We recommend that you clean the bean tank regularly before
refilling beans, using a dry cloth. Before doing this, switch off
the coffee machine.
Ⅲ Refill beans as described in Chapter 3.4.
The message REFILL BEANS will disappear after you draw
off your next cup of coffee.
14.5 Replacing the filter
After drawing off 50 liters the filter cartridge will be used
up.
Refer to Chapter 6.2 «Replacing the filter».