Filter
Top Products
17
1 Preparing and using for the first time
g T Turn the Rotary Switch until HARDNESS 25°dH is dis-
played.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
HARDNESS
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY appears on the display.
You can adjust the grinder on a continuous scale to suit the degree
of roast of your coffee.
If you adjust the consistency of grind when the grinder is not oper-
ating, the grinder adjustment switch could be damaged.
T Only adjust the consistency of grind when the grinder is run-
ning.
The consistency of grind setting is correct if the coffee flows regu-
larly from the coffee spout. In addition a fine, thick crema forms.
Example: Proceed as follows to change the consistency of grind dur-
ing the preparation of an espresso.
T Open the cover of the bean container.
T Place a cup under the coffee spout.
i T Press the Espresso button.
The grinder starts up.
1 ESPRESSO and the coffee
strength are displayed.
T Turn the grinder adjustment switch to the desired position
while the grinder is running.
The espresso is prepared and the consistency of grind is
adjusted.
T Close the cover of the bean container.
Adjusting the grinder
CAUTION