Filter
Top Products
39
5 Maintenance
If you do not want to start changing the filter just yet, turn the E
Rotary Switch until CHANGE/ START NO is displayed. Press
the Rotary Switch to exit the maintenance programme. The
prompt to change the filter remains active.
c T Press the Maintenance button.
CHANGE FILTER / PRESS BUTTON
T Remove and empty the water tank.
T Open the filter holder and remove the old CLARIS Blue filter
cartridge and extension piece.
T Fit the filter extension on top of a new filter cartridge.
T Insert the filter cartridge into the water tank, exerting slight
pressure.
T Close the filter holder. It will click into place audibly.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Place a receptacle (at least 500 ml) under the cappuccino
frother.
T Turn the setting wheel of the cappuccino frother to the
steam position n.
c T Press the Maintenance button.
FILTER RINS., water flows out of the frother.
You can interrupt rinsing of the filter at any time by pressing
E
any button. Press the Maintenance button c to continue rins-
ing of the filter.
The water may be slightly discoloured. This is not harmful to
E
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately 500 ml.
The IMPRESSA heats up and is once more ready for use.
After 220 preparations or 80 switch-on rinses, the IMPRESSA will
prompt you to clean it.
If the wrong cleaning agent is used, the machine could be damaged
and/or traces could be left behind in the water.
T Use only original JURA maintenance products.
Cleaning the machine
CAUTION