Jura Capresso JURA-13549 Coffeemaker User Manual


 
27
4 Permanent settings in programming mode
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the amount of milk for a
latte macchiato from
16 SEC to 20 SEC, the interval from
30 SEC to 20 SEC and the amount of water from 45 ML to
40 ML.
Precondition:
COFFEE READY is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
PRODUCTS is displayed.
k T Press the Rotary Switch to enter the programme item.
PRODUCT / SELECT PRODUCT
Next select the button of the product for which you would like E
to make settings. No product is prepared at this point.
To change the setting for a double product, press the corre-
E
sponding button twice within two seconds.
q T Press the Latte Macchiato button.
1 LATTE MAC. / COFFEE 45 ML
k T Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / COFFEE 45 ML
g T Turn the Rotary Switch until 1 LATTE MAC. / COFFEE
40 ML is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
1 LATTE MAC. / COFFEE 40 ML
g T Turn the Rotary Switch until 1 LATTE MAC. / MILK
16 SEC is displayed.
k T Press the Rotary Switch to enter the programme item.
1 LATTE MAC. / MILK 16 SEC
g T Turn the Rotary Switch until 1 LATTE MAC. / MILK
20 SEC is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
1 LATTE MAC. / MILK 20 SEC
g T Turn the Rotary Switch until 1 LATTE MAC. / PAUSE
30 SEC is displayed.