Filter
Top Products
34
4 Permanent settings in programming mode
The maintenance status can also be displayed in addition to E
the number of performed maintenance programmes. The bar
shows the current maintenance status. When the bar is com-
pletely filled, your IMPRESSA will request the respective main-
tenance programme.
k T Press the Rotary Switch to exit the programme item.
INFORMATION
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
You can change the unit for the amount of water from ‘ml’ to ‘oz’.
Example: Proceed as follows to change the unit for the amount of
water from
ML to OZ.
Precondition:
COFFEE READY is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
g T Turn the Rotary Switch until
SETTINGS / UNIT ML is
displayed.
k T Press the Rotary Switch to enter the programme item.
SETTINGS / UNIT ML
g T Turn the Rotary Switch until UNIT OZ is displayed.
k T Press the Rotary Switch to confirm the setting.
CONFIRMED appears briefly on the display.
SETTINGS / UNIT OZ
g T Turn the Rotary Switch until EXIT is displayed.
k T Press the Rotary Switch to exit programming mode.
COFFEE READY
In this programme item you can set the language used by your
IMPRESSA.
Example: Proceed as follows to change the language from
ENGLISH to DEUTSCH.
Precondition:
COFFEE READY is displayed.
k T Press and hold the Rotary Switch until
MAINTENANCE
appears.
Unit for amount of water
Language