Filter
Top Products
11
For using the processing blade –
with the ingredients inside the
processor bowl, start the unit using
the ‘ON’ or ‘PULSE’ setting. Before
commencing ensure that the food
pusher is in place to avoid splashing
from the feed chute. Ingredients can
be added through the feed chute
whilst processing.
If ingredients stick to the sides of the
processor bowl during processing,
press the control switch button to
the ‘OFF’ position, switch off at the
power outlet and unplug, remove
the processor lid and then push the
food back onto the blades using the
plastic spatula to scrape down the
sides of the bowl. Then recommence
processing.
NOTE:
Do not over fill the processor
bowl above the ‘MAX LEVEL’ line for
solids and above the ‘MAX LIQUID
FILL’ mark for liquids as this could
result in overflow. To reduce the risk
of overflow, always add drier or
thicker ingredients to the processor
bowl prior to adding fluids.
NOTE:
The food processor is
designed so the motor will not
operate without the processor
bowl and lid correctly locked
into position. In the event that
the food processor starts without
the processor bowl and lid
correctly locked into position,
immediately disconnect at the
power outlet and return to your
local Kambrook Service Centre
for examination.
KFP400_410_IB_C12.indd 11 13/12/12 5:26 PM