Filter
Top Products
9
WARNING: All blades must
be handled carefully as
they are sharp.
Using the Processing Blade
1. Carefully remove the protective
cover from the processing blade.
2. Hold the central plastic spindle
of the processing blade and
carefully place it over the drive
shaft (see Fig. 3).
Fig. 3
3. Place the processor lid on top of
the processor bowl and lock into
place (see Fig. 4).
LOCK
Fig. 4
4. Plug the power cord into the
power outlet and switch the
power outlet ‘On’.
5. To begin operation, press the
control switch button to either
the ‘ON’ or ‘PULSE’ position,
depending on your requirements.
For short bursts of power, use the
‘PULSE’ setting.
6. To remove the processing blade,
hold the central plastic spindle
to pick up the processing blade.
Using the Reversible
Processing Disc
The stainless steel reversible disc has
different processing blades on each
side. The reversible disc has a slicing
function on one side and a shredding
function on the other side.
1. Place the reversible disc on the
drive shaft with the selected
blade facing upwards (see Fig. 5).
Fig. 5
NOTE:
The corresponding name
of the SLICE or SHRED is marked on
each side of the reversible disc.
2. To remove the reversible disc,
hold the central plastic spindle
on the reversible disc to pick up
the reversible blade.
Assembly & Operation of Your Food Processor
continued
KFP400_410_IB_C12.indd 9 13/12/12 5:26 PM