Filter
Top Products
Wall
Note:
Oven Control Pad Features
The appearance of your oven control may differ slightly from the one illustrated below. However, all functions
are the same. Also, push buttons or pads may be shaped differently than those appearing in this Use and Care
Guide.
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become
familiar with the various functions of the oven as described below.
OVEN CLOCK SET
iNTERiOR PAD Used to
LIGHT PAD set the time
Used to turn of day.
oven interior light
ON and OFF.
TIMER SET/OFF PAD
Used to set or cancel the
minute timer. The minute
timer does not start or
stop cooking. Also, TIMER
COOKTIME
PAD Used
to enter the
length of the
baking time.
UP and DOWN ARROWS PADS
Used along with the function pads
to select oven temperature, cook
time, start time (when programming
ADD 1 MINUTE PAD Used to add BAKE PAD--Used
1 minute to the Timer Countdown. to select the bake
This feature works with the Kitchen function.
Timer only and does not affect any /
an automatic start time), time of day, cook time or start time functions.!
LIGHTS-- These
• lights show which
feature is in use.
I _)_
Bake I Broil
BROIL PAD-- Used
_O
I Cook
Time
SET/OFF Pad is used to _ to select the variable
set the Continuous Bake e_ • • • broil function.
Feature _ f--_-_
Select Timer Delay _ r_\/_Kf ( m _ I Warm & I
_Clean I Set/Off I Start ...... _,STOP ) I Hold_d
SELECT CLEAN PAD_ J • PREHEAT _ ,..______.,--_ WARM & HOLD
Used to select the Self- / DOORLOCKED _ Lov_u_ PAD-- Used to set
Cleaning cycle. A 2, 3 _ t u _oc_o_ the Warm & Hold
or 4 hour Self-Clean _ / _ feature.
time may be selected. ................................................................................................................................../ .................................................................................................................................................................................\ ..........................................................................
DELAY START PAD Used to set the OVEN, PREHEAT & DOOR LOCK LIGHTS* The "Oven" light STOP PAD-- Used to clear any _='
desired start time for baking. May be will glow each time the oven is turned on. The "Preheat" light function previously entered except ........
used with COOK TIME to program a will glow when the oven is first set to operate, or if the desired the time of day and minute timer. _
delayed bake cycle or to program a temperature is reset higher than the actual oven temperature. The Press STOP to stop cooking. Also
delayed clean cycle. "Door Locked" light will flash until the door locks when the self- the STOP pad is used to activate
clean cycle is in use. It glows constantly after the door locks, oven lockout setting.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When preheat indicator light turns OFF, your oven is ready.
For a silent control panel:
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the control can be programmed
for silent operation.
1. To tell if your oven is set for normal or silent operation press and hold for 7 seconds. "= ="or "SP" (speaker)
appears in the display.
2. Within 5 seconds, press the A or v pad to switch between normal sound operation and silent operation mode.
The display will show either "- -" or "SP".
3. Wait 5 seconds to return to normal operating mode.
If "SP" appears, the control will operate with normal sounds and beeps. If "- -" appears, the control is in the silent
operation mode.
Temperature Conversion (Fahrenheit / Celsius)
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (77°C to 288°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press and hold for 7 seconds until °F or °C appears in the display.
2. Press the A or v pad to change °F to °C or °C to °R
3. Wait 5 seconds to accept the changes or press _ to reject the changes.
17