Filter
Top Products
- REPAIR PARTS -
Kenmore Reverse Osmosis Drinking Water System, Model No. 625.385750
Key Part Description of Part
No. Number
1 7221128 Sump (3 req.)
2 7223633 O-Ring, 2-1/4" x 2-1/2" (3 req.)
3 7199486 Flow (Control) Insert
4 9006062 Screw (2 req.)
5 9041700 Hanger Washer (2 req.)
6 7234210 Paddlewheel & O-Ring Kit
7 7234228 Paddlewheel Cover (incl. screws)
8 7234294 PWA (incl. screw)
9 7234317 Check BalIAssembty
10 7229451 Screw (4 req.)
11 7229532 Automatic Shut-off Cover
12 7250876 Diaphragm Kit
13 7234325 Plunger & Spacer Ring Kit
• 7095030 Cone Screen
14 42-38476 Filter, Carbon Block (2 pack)
15 7267970 RO Membrane Cartridge
16 7208560 Connector, 1/4" x 3/8"
17 7205326 Storage Tank
Key Part Description of Part
No. Number
18 7251034 Connector, 1/4 NPT x 3/8 Tube
19 7267124 Spacer
20 7261500 Rep'l Electronic Ring
21 7208489 Drain Adaptor
22 7227310 Tee, Feed Adaptor
23 7266631 Faucet
24 7234333 Cover
25 7209566 Push-in Fitting Kit, 1/4" A•
7209574 Push-in Fitting Kit, 3/8" O•
26 7255096 Manifold, incl. key nos. 6, 7, 9 - 13
• 7266615 Owner's Manual
Optional Accessories and Tubing
• 7161823 Tubing, 1/4"x20'-white [_•
• 7161784 Tubing, 1/4" x 100' - white [_•
• 7157280 Tubing, 3/8" x 20' - white _•
• 7161750 Tubing, 3/8" x 100' - white _•
• 7122798 Optional Drain Adaptor •
• 42-34707 Suppl. Storage Tank, 3.2 gallon •
• 7123613 Grease for O-Rings •
[] Tubing for remote installations (not included) see page 17, also direct replacement for colored lengths of tub-
ing.
AO See page 18 for use locations - Note: This o-ring and collet are for replacement in the manifold housing only.
They do not fit the other push-in fittings, key nos. 16, 17, 21, 22 and 23.
• not included
• not illustrated
19
Problems, Questions? Call 1-800-426-9345 Kenmore Water Line