Filter
Top Products
Before Setting Surface Confro&
Using proper cookware
DO NOT place flammable items such as
plastic salt and pepper shakers, spoon holders or plastic
wrappings on the cooktop when it is in use. These items
could melt or ignite. Pothoiders, towels or wooden spoons
could catch fire if placed too close to the range cooktop.
Important: DO NOT place aluminum foil, or ANY materlal
that can melt an the range caaktap. If these items melt
they may damage the cooktop.
For best cooking results,
cookware should have
flat bottoms that rest
level on the surface
burner grate. Before
using cookware, check
for flatness by rotating
a ruler across the
bottom of the
cookware (Fig. 1).
q
Fig. 1
Please note: The size and type of utensil used, and the
amount and type of food being cooked will influence the
burner flame setting needed for best cooking results.
Setting proper burner flame size
Never extend the flame beyond the outer
edge of the cooking utensil. A higher flame wastes energy,
and increases your risk of being burned by the flame.
The color of the flame is the key to proper burner adjustment.
A good flame is clear, blue and hardly visible in a well-lighted
room. Each cone of flame should be steady and sharp. Adjust
or clean burner if flame is yellow-orange.
Correct
flame setting
Q
Far mast cooking; start on the highest setting and then
turn to a lower setting to complete the process. Use the
recommendations below as a guide for determining
proper flame size for various types of cooking (Fig. 2)
Cookware material types
The most popular materials available are:
Aluminum - Excellent heat conductor. Some types of food
will cause it to darken (Anodized aluminum cookware
resists staining & pitting).
Copper - Excellent heat conductor but discolors easily.
Stainless - Stow heat conductor with uneven cooking
results. Is durable, easy to clean and resists staining.
Cast Iron - A stow heat conductor however wiii retain heat
very weft. Cooks evenly once cooking temperature is
reached.
Porcelaln-enamel on metal - Heating characteristics wiii
vary depending on base material.
Glass - Stow heat conductor.
For deep fat frying; use a thermometer and adjust the
surface knob accordingly. If the fat is too cool, the food
will absorb the fat and be greasy. If the fat is too hot, the
food will brown so quickly that the center will be under
cooked. Do not attempt to deep fat fry too much food at
once as the food will neither brown or cool{ properly.
Flame size _ Type of cooking
High flame Start most foods; bring water to a boil;
pan broiling.
Medium flame Maintain a stow boil; thicken sauces,
gravies; steaming.
Low flame
Keep foods cooking; poach; stewing.
Fig. 2
_These settings are based for medium-weight metal or
aluminum pans with lids. Settings may vary when using
cookware made from different materials.