Filter
Top Products
- 65 -
13. OPERATION PRINCIPLE AND REPAIR METHOD OF ICEMAKER
13-1 OPERATION PRINCIPLE
13-1-1 Operation Principle of IceMaker
Power On
Start Position
• Adjusts EJECTOR to Start Position with power on.
Icemaking
Mode
•Waits until water becomes ICE after starting the
icemaking operation.
Harvest
Mode
• Runs MOTOR to drop ice from the tray into the ICE BIN.
(During harvest mode, check if the ice bin is full)
Park Position
• Reaches Start Position
Fill
• Performs Ice Making Mode after supplying water by
operating the SOLENOID in ICE VALVE.
Test Mode
• To operate LINE and SERVICE, press and hold the
Fill Key for 3 seconds. The icemaker will run through
3 stages: Harvest Fill Icemaking.
1. Turning the Icemaker stop switch off (O) stops the ice making function.
2. Setting the Icemaker switch to OFF and then turning it back on will reset the icemaker control.
Cube Size
Indicator Light
Cube Size
Selection Button
Automatic
Shut off Arm
Power
Switch
EJECTOR