Filter
Top Products
MULTI-STAGE COOKING
Multi-Stage cooking allows you to set the oven to cook in one stage at a certain power level for a chosen time or
temperature and then in a second stage at a different power level for a chosen time or temperature. The cooking process
can be set for three memory stages when Programmed Defrost is included as the first stage. The stages are set before
cooking and will sequence automatically when oven is started.
.
2.
.
.
.
.
.
8.
.
10.
Touch CLEAR.
Touch TIME or TEMP CONTROL. The lights above
TIME or TEMP and below COOK I will go on. The
display window will show "0" or "F."
Touch the correct numbers for the time or temp-
erature of the first cooking stage.
Touch POWER CONTROL. The light above POWER
will go on. The display window will show "HI."
Touch the correct numbers for the cooking power
level of the first cooking stage (if other than "HI").
Touch MEMORY/RECALL or PAUSE. The light
below COOK 2 will go on. The display window will
show "0."
Touch TIME or TEMP CONTROL.
Touch the correct numbers for the time or temp-
erature of the second cooking stag_.
Touch POWER CONTROL. The display window will
show "HI."
Touch the correct numbers for the cooking power
level in the second cooking stage (if other than "HI").
EXAMPLE: In preparing a cake mix, the cookbook
calls for a first stage of 7 minutes at the "50 (SIMMER)"
power level followed by a second stage of 3 minutes at
"HI." The following steps explain how to set the oven:
First Stage (7 minutes: power level 50 SIMMER)
1. Touch CLEAR.
2. Touch TIME.
3. Set 7 minutes by touching "7,"
"0" and "0." "700" will show in
the display window.
_N
E33EZ3rT1
r'_UE3OD
_EE3EE3
11. Touch START.
MULTI-STAGE COOKING WITH
PROGRAMMED DEFROST
Ifyou want to cook after using the Programmed Defrost,
before setting the above multiple-stage cooking, set the
Programmed Defrost and touch MEMORY/RECALL,
then follow the above instructions numbered 2_I I. See
Pages 21 through 25 for the detailed instructions of
Programmed Defrost. The cooking process can be set
up to three stages when PROGRAMMED DEFROST is
one of the stages.
To pause between stages
To set the oven to stop between stages, touch PAUSE
when setting the oven. See Page 12 for more detailed
directions.
NOTE: If you touch MEMORY/RECALL instead of
PAUSE, the oven will not stop but will remember the
next stage and continue working.
.
.
Touch POWER CONTROL.
"HI" will show in the display
window to remind you that the
oven will operate at highest
power unless you enter a lower
power setting.
Touch numbers "5" and "0."
"50" will show in the display
window (indicating that you
have set the oven to operate at
power level 50). The first stage
has been set.
r-_r-_
r-_EE3r'_
r'_r-_
r'_r"_r'_
I 26