Filter
Top Products
8
B on the upper body. This will prevent operation of the machine if the cover is
lifted (e.g for replacement of the discs) (Fig. No 3A), and to only allow the
machine to be started manually (by pressing button “I”) if the cover is in the
closed position and locked in place.(Fig. No 3).
Fig. No 2 - Position of the electrical safety protection.
Fig. No 3 - Position of the mechanical safety protection.
Fig. No 3A - Position of the electrical safety measures.
17
4.3 - ELECTRICAL DIAGRAM FOR THE VEGETABLE CUTTER
Fig. No 20 - Diagram of the single phase 220-240 Volt electrical equipment.
4.4 - CHECKING OPERATION OF THE MACHINE
Test the operation daily before first use with the following procedure:
a) Press the “I” on button and the “O” off button and check that the
corresponding indicator lights go on and off (Fig. No 21).
b) Check that the motor stops and starts when the pusher handle is raised and
lowered.
c) Check that the machine stops when the cover is raised and that it can only be
started again by pressing the START “I” button after the cover has been
correctly secured.
d) Carry out the check as for point “c” with the bowl or the chute in place.
Fig. No 21 - Start and stop button.
START “I”
STOP “O”