Filter
Top Products
SECTION 3
Using Your Brewer
SECTION 3
Using Your Brewer
Prepare Your Cup
Fill a 16 oz. plastic cup with ice. Do not use glass.
Remove the Drip Tray if necessary and place cup
under the Brew Head.
Brewing Over Ice
Choose Vue
®
Pack
Make sure your Vue
®
pack
features the Brew Over Ice Icon.
Lift the Handle, insert the
Vue
®
pack into the Holder
and lower the Handle.
Select Beverage Type & Size
Select the “Brew Over Ice” button. The Touchscreen
will display as pictured.
Select the desired beverage type.
Select your beverage size using the + and - buttons
at the bottom of the Touchscreen.
* Available sizes for Iced Coffee and Iced Tea/Other
are 6 oz., 8 oz. and 10 oz.
* Available sizes for Iced Café are 6 oz. and 8 oz.
Available Sizes*
What is a Cleansing Brew?
After brewing certain Vue
®
pack varieties such as hot
cocoa, iced tea or a café beverage, we recommend
performing a cleansing brew as follows:
Step 1 Take a used Vue
®
pack and peel off the lid. Discard
the lid and any filter which adheres to it. Ensure the
empty Vue
®
pack cup is clean.
Step 2 Place the EMPTY Vue
®
pack cup in the brewer and
place a mug on the Drip Tray.
Step 3 Lower the Handle, then press “BREW.” The brewer
will dispense 8 oz. of hot water into your mug.
Once complete, discard the water and carefully
remove the Vue
®
pack cup. The cleansing is
complete.
Stopping the Brewing Process
If you need to stop the brewing process after it has started,
press and release the Power Button to turn the brewer off.
The beverage flow will stop and the brewer will shut off.
The Vue
®
pack will be HOT after brewing. Use caution when
removing. Allow it to cool completely before handling.
When turning the brewer back on, place an empty mug
on the Drip Tray and press the Power Button. Since the
previous brew was interrupted, some water may drip
into the mug during preheating.
We recommend that you perform a cleansing brew before
preparing your next beverage (see above). If this is not
done, the brewer may deliver an additional amount of
water for your next beverage.
Dispensing Hot Water
If you need hot water for cooking (instant soup or oatmeal,
for example), place a cup or bowl below the Brew Head.
Place your cup or bowl as far back as possible. Lift and
lower the Handle WITHOUT inserting a Vue
®
pack. Select
your desired cup size and then press “BREW.” The brewer
will dispense hot water into your cup or bowl.
Step 1
Step 2
Step 3
Press
& Enjoy!
Do not remove mug or lift the Handle until “Enjoy!”
appears on the Touchscreen.
Remove the Vue
®
pack after brewing is complete.
The Vue
®
pack will be HOT after brewing. Use caution when
removing. Allow it to cool completely before handling.
14 15