Filter
Top Products
12
Coffee Maker Enhanced Features
Pause and Pour Feature
The Pause and Pour feature enables you
to remove the carafe from the coffee maker
and pour a cup of coffee before brewing
is finished. When the carafe is removed,
a special valve stops the flow of coffee from
the brew basket. However, brewing does
not stop. If the carafe is not placed back in
the coffee maker within 25 seconds, water
and coffee will overflow the brew basket.
Automatic Brew Timer
The coffee maker can be programmed to
brew coffee at a preset time, making it easy
to wake up to fresh coffee every morning.
To program and activate the Automatic
Brew Timer:
1. Press the MENU button 1 time to enter
the “Auto Brew Timer” mode. The “Auto”
and “OFF” indicators will flash. Press the
“+” (plus) or “-” (minus) button to select
“ON”. Press the SET button.
2. The hours digits will flash next. Press the
“+” (plus) or “-” (minus) button to set the
hour. Press the SET button.
3. The minutes digits will flash next. Press
the “+” (plus) or “-” (minus) button
to set the minutes. Press the SET button.
4. The “AM/PM” indicators will flash next.
Press the “+” (plus) or “-” (minus) button
to select AM or PM. Two short beeps will
sound indicating programming is complete.
5. The “Auto” indicator will turn on and the
coffee maker will begin brewing at the
programmed time. The time that is set
will be displayed for 3 seconds as
a reminder of the set time. The
programmed time will remain active
until steps 1-4 are repeated or power is
interrupted for more than 60 seconds.
NOTE: To turn off the Automatic Brew
settings, return to the Automatic Brew
function on the menu and select “OFF”.
Placing the Lid on the Thermal Carafe
To properly place the lid on the thermal
carafe, follow these instructions.
1. Place the lid onto the thermal carafe with
the thumb lever to the right of the handle.
2. Rotate the lid counterclockwise until
the thumb lever is over the handle.
3. To pour, press the thumb lever down.
W10474602B_Coffee Maker.indd 12 6/8/12 1:18 PM