Filter
Top Products
9
TripleTier™ Flame Burner
with InstaWok™ Ring
The TripleTier™ Flame Burner with InstaWok™ Ring is a
multifunction burner that produces everything from a rapid boil
down to a low simmer.
The TripleTier™ Flame Burner with InstaWok™ Ring is functioned
by a dual valve control knob, which controls two separate
burners. See “TripleTier™ Burner with High Power Settings and
Low Power Simmer Settings” section.
The InstaWok™ Ring supports 12" to 14" (30.5 cm to 35.6 cm)
Wok pans and can be flipped over to become a flat grate for use
with flat-bottomed cookware.
IMPORTANT: The InstaWok™ Ring must be in place when using
the TripleTier™ Flame Burner.
To Use the InstaWok™ Ring:
1. Check that the control knob is in the OFF position and the
grate is completely cool before handling.
2. Remove grate from cooktop and flip the grate over so that the
wok supports are pointing up.
3. Place the wok Ring within the guides.
Surface Burners
IMPORTANT: Do not obstruct the flow of combustion and
ventilation air around the burner grate edges. Before cleaning,
make sure all controls are off and the oven and cooktop are cool.
Do not use oven cleaners, bleach or rust removers.
Burner Cap Alignment
Always keep the burner cap in place when using a surface
burner. A clean burner cap will help prevent poor ignition and
uneven flames. Always clean the burner cap after a spillover and
routinely remove and clean the caps according to the “General
Cleaning” section.
TripleTier™ Flame Burner
A.InstaWok™ Ring
B.Grid base
C. Wok supports pointing down (for
use with flat-bottomed cookware)
D.Support guides
A.InstaWok™ Ring
B.Grid base
C.Wok supports pointing up
D. Support guides
A
B
D
C
A
C
B
D
A.TripleTier™ Flame Burner Caps
B. Burner base
C.Alignment pins
D. Igniter
E. Gas tube opening
A
B
C
D
E