Filter
Top Products
Thread the oower sunulv cord throueh the hole made at the bottom of the ton cabinet
I
Personal Injury Hazard
Two people are required to lift this microwave. Failure to use more than one person during installation
may result in oersonal iniurv.
I
Hang the unit on the lower edge of the mounting plates. Rotate the unit upward until it engages the
upper hooks. See
Figure 14.
Take care that the power cord is able to clear the edge of the hole as the
unit is rotated upward. (In the case of a non-recessed bottom in the top cabinet, the hole for the cord
may need to be enlarged.) Remove the carton oortions.
I
Personal Injury Or Property Damage Hazard
Both upper hooks must be engaged and the unit must be secure before you remove your support.
Failure to do so could result in personal injury or property damage.
I
Raise slider levers at the bottom of the unit up against the unit and insert
decorative
screws (2). Tighten
each screw with a Phillips head screwdriver. See
Figure 15.
I
Decorative Screw
12