KitchenAid 1435 Microwave Oven User Manual


 
8.
Use the two top cabinet mounting screws (C) and flat washers (D), supplied in the installation hardware,
to attach the unit to the top cabinet. See Figurel6. Note: If mounting plates were installed using only
toggle bolts, use the adjusting screws to attach the unit to the top cabinet.
ommet (for metal
Figure1 6
9.
Make a bundle of the power supply cord and attach it to the inside of the cabinet using the cord hanger.
A
short power cord is provided to reduce the risks resulting from contacting the cooking surface or from
becoming tangled.
I
Electric Shock Hazard
Install power-supply cord bushing around hole drilled in a metal cabinet. Failure to do so could result
in electrical shock.
CHECK LIST FOR INSTALLATION
1. Make sure the unit has been installed according to the instructions.
2. Remove all packing material from the oven.
3. Plug in the power cord.
4. Read the Use and Care Guide Manual.
CHECK LIST FOR INSTALLATION
1.
Make sure the unit has been installed according to the instructions.
2.
Remove all packing material from the oven.
3.
Plug in the power cord.
4.
Read the Operation Manual.
5.
Keep these Installation Instructions for the local electrical inspector’s use.
13