Filter
Top Products
TOOLS RECOMMENDED FOR INSTALLATION
Phillips Screwdriver
Electric Drill
l/2”, 5/8” and 3/32’ Drill Bits
1 -l/2’ Wood Bit or metal hole cutter (if metal cabinet is used)
Saw to cut exhaust opening (if needed)
Knife or single edge razor
Pencil
Measure
Tape
Protective drop cloth for product and range. You may use part of the carton for protection.
INSTALLATION HARDWARE
The installation hardware (items l- 8) packed with the product should contain the following:
I
1 ITEM NAME
QUANTITY
1
Wood Screw 5 x 30 mm*
6
2
Toggle Bolt 3/l 6 inch*
4
3
Top Cabinet Screw 5 x 55 mm
2
4
Flat Washer 30 mm diameter
2
5
Decorative Screw
2
6
Power Cord Hanger
1
7
Grommet
1
8
Exhaust Adaptor Assembly
1
*There may be leftover screws or toggle bolts depending on installation.
0
2
0
7
se with metal cabinets. Surround
e power cord opening. Cut to fit.
0
8