KitchenAid Ventilation Hood Ventilation Hood User Manual


 
11
5. Push down and twist to remove the fuse cover.
6. Replace the fuse with a new 5 amp time-delay fuse.
7. Replace the fuse cover.
8. Replace the fuse holder assembly cover with the 2 screws
removed earlier.
9. Reconnect power at the circuit breaker of fused circuit box.
Cleaning
Exterior surfaces:
Do not use steel wool or soap-filled scouring pads. Rub in
direction of the grain line to avoid scratching the surface.
Always wipe dry to avoid water marks.
KitchenAid
®
Stainless Steel Cleaner/Polish or Stainless Steel
Wipes are the cleaners recommended for cleaning stainless
steel surfaces on this product. To order call our Customer
Service Center at 1-800-442-9991 or order on-line at
www.applianceaccessories.com and ask for part number
4396920 (cleaner/polish) or 8212510 (wipes). To order from
Canada, call 1-800-807-6777.
Mild liquid detergent and water.
Wipe with damp soft cloth or nonabrasive sponge, then rinse
with clean water and wipe dry.
Metal Filters
Use 2 hands to remove filters. Push tab back to release locking
pin, pull down and forward. Repeat with other filter.
Wash metal filters as needed in dishwasher or hot detergent
solution to clean.
Reinstall metal filter by placing the back edge of filter into channel
at rear of hood. Push filter up while pushing tab back. When filter
is in place, release tab. Locking pin will hold filter in place.
Recirculating Installation Filters:
Do not wash charcoal filter packs. Replace with Recirculation Kit
Part Number 4396565.
Remove the old charcoal filter:
1. Rotate to the left (counterclockwise) and pull away from the
blower cover and discard filter pack. Repeat for other filter.
2. Place the charcoal filter against the blower cover and rotate to
the right (clockwise) to attach to cover.
3. Reinstall metal filter by placing the back edge of filter into
channel at rear of hood. Push filter up while pushing tab back.
When filter is in place, release tab. Locking pin will hold filter
in place.
A. Filter
A
Accessories
Optional installation kits are available from your dealer.
Recirculation Kit Part Number 4396565 includes 2 charcoal filter
packs and vent cover.
INTERCHANGEABLE FRONT TRIM
Architect
®
Series - 30 Trim Kit
Stainless Steel
White
Black
Biscuit
Architect
®
Series II - 30 Trim Kit
White
Black
Biscuit
Pro Line
®
Series - 30 Trim Kit
Stainless Steel
Meteorite
Architect
®
Series - 36 Trim Kit
Stainless Steel
White
Black
Biscuit
Architect
®
Series II - 36 Trim Kit
White
Black
Biscuit
Pro Line
®
Series - 36 Trim Kit
Stainless Steel
Meteorite
PART NO.
8212621
8212462
8212463
8212461
8212623
8212624
8212622
8212464
8212465
8212625
8212467
8212468
8212466
8212627
8212628
8212626
8212469
8212470