Filter
Top Products
6
Product Dimensions
Cabinet Dimensions
Venting Requirements
(vented models only)
■ Vent system must terminate to the outside, except for non-
vented (recirculating) installations.
■ Do not terminate the vent system in an attic or other enclosed
area.
■ Do not use a 4" (10.2 cm) laundry-type wall caps.
■ Use a metal vent only. A rigid metal vent is recommended.
Plastic or metal foil vent is not recommended.
■ The length of vent system and number of elbows should be
kept to a minimum to provide efficient performance.
For the most efficient and quiet operation:
■ Use no more than three 90° elbows.
■ Make sure there is a minimum of 24" (61.0 cm) of straight
vent between the elbows if more than 1 elbow is used.
■ Do not install 2 elbows together.
■ The vent system must have a damper. If the roof or wall cap
has a damper, do not use the damper supplied with the range
hood.
■ Use clamps to seal all joints in the vent system.
■ Use caulking to seal exterior wall or roof opening around the
cap.
■ The size of the vent should be uniform.
Cold weather installations
An additional back draft damper should be installed to minimize
backward cold air flow and a thermal break should be installed to
minimize conduction of outside temperatures as part of the vent
system. The damper should be on the cold air side of the thermal
break.
The break should be as close as possible to where the vent
system enters the heated portion of the house.
Makeup air
Local building codes may require the use of makeup air systems
when using ventilation systems with greater than specified CFM
of air movement. The specified CFM varies from locale to locale.
Consult your HVAC professional for specific requirements in your
area.
17³⁄₈" (44.1 cm) - 30" (76.2 cm) model
23³⁄₈" (59.4 cm) - 36" (91.4 cm) model
6" (15.2 cm)
9¾" (24.8 cm)
¾" (1.9 cm)
⁵⁄₈" (1.6 cm)
29⁷⁄₈" (75.9 cm) - 30" (76.2 cm) model
35⁷⁄₈" (91.1 cm) - 36" (91.4 cm) model
25¼" (64.1 cm) - 30" (76.2 cm) model
31¼" (79.4 cm) - 36" (91.4 cm) model
3" (7.6 cm)
18" (45.7 cm) with screen extended
11" (27.9 cm)
1⁹⁄₁₆" (4.0 cm)
10" (25.4 cm)
15" (38.1 cm)
min. clearance
upper cabinet
to countertop
13" (33 cm)
cabinet depth
30" (76.2 cm) or
36" (91.4 cm) min.
cabinet opening width
24" (61 cm) min.
30" (76.2 cm)
suggested max.
bottom of cabinet
to cooking surface
36" (91.4 cm)
base cabinet
height