Filter
Top Products
English
4
English
5
PRODUCT DESCRIPTION
BeerTender
®
components
1. BeerTender
®
at home draughting system
2. Refrigerating chamber
3. Lid
4. Lid opening handle
5. Control panel
6. Tap cover
7. Dispensing spout
8. Beer tap handle
9. Drip grate
10. Drip tray
11. Main power switch
12. Power cord with plug
Other Components
13. 5 Liter DraughtKeg
TM
(not included)
14. Replaceable Draught Beer tube (Should be changed with each new
DraughtKeg
TM
) (5 included with purchase)
BEFORE USE
CHILD SAFETY LOCK
n Make sure that children can not play with the appliance.
n Do not leave the materials used to pack the appliance within children’s
reach.
n To prevent children from using the appliance, you can remove the tap
handle. To remove the handle, make sure that it is in an upright position and
pull upward - fig. 1.
FIRE PREVENTION
n In the event of a fire, use carbon dioxide (CO2) extinguishers.
n Do not use water or powder extinguishers.
SETUP AND MAINTENANCE
n Install the BeerTender
®
in an upright position in a safe place.
To ensure that the BeerTender
®
works correctly and efficiently, the following
is strongly advised:
n Place it on a perfectly level and stable surface.
n Choose a clean, well-lit area with an easily accessible electric socket.
n Keep the appliance at a minimum distance (4 inches) from the stove as
shown in the diagram - fig. 2.
n Keep the appliance at a minimum distance (2 ½ inches) from the walls.
n Store the DraughtKeg
TM
at room temperature or in the refrigerator.
n Make sure the BeerTender
®
is not exposed to direct sunlight.
n Do not use the BeerTender
®
outdoors.
n Do not place the BeerTender
®
on very hot surfaces or near open flames, as
these may melt or damage the casing.
n Your BeerTender
®
uses a technology that delivers ultimate cooling results
when the ambient temperature is between 54°F and 86°F. At colder
temperatures, the appliance cooling system could be damaged. At
warmer temperatures, the cooling system will not be able to reach the pre-
programmed temperature - fig. 3.
WARNING! To avoid overheating, always keep the BeerTender
®
appliance
out of direct sunlight. To obtain good cooling performance, never install your
machine in a room with an ambient temperature above 86°F.
USING THE BEERTENDER
®
SYSTEM
n Always hold the appliance by the bottom edge when lifting - fig. 4.
n To obtain draught beer of optimal quality you should keep two basic factors
in mind, the temperature of the beer and hygienic conditions. Follow these
few simple steps for the ideal use of BeerTender
®
.
A new draught beer tube should be used with each DraughtKeg
TM
.
A bag of 5 tubes is included with the BeerTender
®
appliance. To order
additional beer tubes, please contact www.beertender.com or call
1-888-KRUPS.