Filter
Top Products
13
Ⅲ STEAM
READY
Ⅲ To draw off steam, open the steam/hot water draw-off tap (14)
(Fig. 13).
Ⅲ The illuminated ring (2) is active.
Ⅲ You can adjust the steam draw-off time individually by turning
the Rotary Switch (1) until the required SEC are displayed.
Ⅲ For example, 35 SEC
Ⅲ If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
Ⅲ During the steam draw-off operation, the message STEAM is
displayed
Ⅲ When the steam quantity is reached, the message CLOSE TAP is
displayed
Ⅲ Close the steam / hot water draw-off tap (14).
Ⅲ STEAM
READY
As long as STEAM READY is on view in the display, the
machine is ready to dispense steam.
Before CLOSE TAP, steam may still escape the system.
13. Drawing off steam with the
Professional-Cappuccino Frother (optional)
The Professional-Cappuccino Frother is optionally available.
Contact your authorized dealer.
13.1 Connecting the Professional-Cappuccino
Frother to the IMPRESSA
Ⅲ Disassemble the replaceable hot water nozzle (Fig. 5) or the
replaceable 2-stage frothing jet (Fig. 6).
Ⅲ Mount the Professional-Cappuccino Frother (Fig. 7)
Ⅲ Press one side of the hose into the opening behind the dial
(Fig. 10)
The optionally available milk container can be used for
sucking in milk. How to connect it see Fig. 8.
13.2 Drawing off cappuccino and hot milk
with Professional-Cappuccino Frother
Ⅲ Fill the milk container with milk or immerse the hose in the milk
directly.
Ⅲ Place a cup under the Professional-Cappuccino Frother (Fig. 8)
Ⅲ Press the steam pre-selection key (8).
Ⅲ HEATING
Ⅲ STEAM
READY
Ⅲ To draw off steam open the steam/hot water draw-off tap (14)
(Fig. 13).
Ⅲ The illuminated ring (2) is active.
Ⅲ You can adjust the steam draw-off time individually by turning
the Rotary Switch (1) until the required SEC are displayed.
Ⅲ For example, 35 SEC
Ⅲ If you do not change the steam draw-off time settings using the
Rotary Switch (1), the machine will use the settings last adjusted
Ⅲ For cappuccino turn the selector switch (1) (Fig. 9) to area
(2).
Ⅲ For hot milk turn the selector switch (1) (Fig. 9) to area (3).
Ⅲ Now place the cup with the cappuccino froth or the hot milk
under the coffee spout and draw of the product of your choice.
E