Lennox Hearth F50 Coffeemaker User Manual


 
16
If the machine is disconnected from power supply, the time
must be programmed again.
15.6 Programming the automatic switch-on time
You must programme the time (Chapter 15.5) if you want to
use the automatic switch-on function.
READY
Press programming key (4) until
FILTER appears.
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until MACHINE ON is displayed.
MACHINE ON
Now press the Rotary Switch (1) to start programming the
switch-on time.
--:--
Turn the Rotary Switch (1) to adjust the hours.
12:--
Press the Rotary Switch (1) to confirm the hour settings and to
activate the minutes.
12:--
Turn the Rotary Switch (1) to select the minutes.
12:05
To confirm the new switch-on time, press the Rotary Switch (1).
MACHINE ON
Press the programming key (4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
READY
15.7 Programming the automatic switch-off time
You can programme your coffee machine such that it will
switch off automatically after a certain time. You can pro-
gramme the switch-off time in a range between 0.5 and 9
hours, or select ––:–– (i.e. inactive).
READY
Press programming key (4) until
FILTER appears.
The illuminated ring (2) is active.
Turn the Rotary Switch (1) until OFF AFT. HR is displayed.
OFF AFT. HR
Now press the Rotary Switch (1) to start programming the
switch-off time. Switch-off time OFF AFT. HR
5.0 HR
Turn the Rotary Switch (1) to adjust the hours.
1.0 HR
To confirm the new switch-off time, press the Rotary Switch (1).
OFF AFT. HR
Press the programming key (4) to quit the programming
mode or select the next programming item using the Rotary
Switch (1).
READY
15.8 Cup counter
You can check how many cups of the following coffee products
were drawn off:
a) 1 cup
b) 2 cups
c) Powder coffee