Filter
Top Products
24
HOW TO USE
I
HOWTOUSE
Before use
~
Clean
the
refrigerator.
laP\;
Clean
your refrigerator thoroughly
and
wipe
off
all
dust that accumulated during
~
shipping.
& CAUTION
------------------..
•
Do
not scratch the refrigerator with a
sharp
object or
use
a detergent that
contains
alcohol,
a flammable liquid or
an
abrasive
when removing
any
tape
or
adhesive
from the refrigerator,.
•
Do
not peel off the model or
serial
number
label
or the technical information
on
the
rear
surface of the refrigerator.
4}
NOTE
------------------------~
Remove
adhesive
residue
by
wiping
it
off with your thumb or
dish
detergent.
Connect
the
power supply.
Check
if
the power supply
is
connected before
use.
Read
the "Turning
On
The
Power" section.
Turn
off
the
icemaker if
the
refrigerator is
not
yet connected to
the
water supply.
Turn
off the automatic icemaker
and
then plug the power plug of the refrigerator
into the grounded electric outlet.
*
This
is
applicable only to certain models.
& CAUTION
-------------...
Running the automatic icemaker before connecting it
to
the water
supply may cause the refrigerator
to
malfunction.
Wait for
the
refrigerator
to
cool.
Allow your refrigerator
to
run
for at least two to three hours before putting food
in
it.
Check
the flow of
cold
air
in
the freezer compartment to ensure proper
cooling.
& CAUTION
-------------...
Putting food in the refrigerator before it
has
cooled could cause
the
food to spoil, or a
bad
odor could remain inside
the
refrigerator.
The refrigerator makes a loud noise after initial operation.
This is
normal.
The
loudness
will decrease
as
the temperature lowers.
Open refrigerator doors and freezer drawers to ventllate
the
interior.
The
inside
of the refrigerator
may
smell
like
plastic at first.
Remove
any
adhesive
tape from
inside
the refrigerator
and
open
the refrigerator doors
and
the freezer
drawers for
ventilation.