Filter
Top Products
17
K/SK/es..0
GB
All types and models are subject to continuous improvement
and the manufacturer therefore reserves the right to make
modifications in the shape, equipment and technology.
Insertion into row of kitchen units
Fig. U. 600 mm appliances can be installed in a row of
kitchen units. To adapt the height of the appliance to the
surrounding furniture a top unit 1 can be added.
A gap of at least 50 mm depth must be provided behind and
along the entire width of this unit so as to ensure sufficient
ventilation. The area of ventilation underneath the ceiling
should be at least 300 cm
2
. The greater the area the more
economically the appliance will run.
W When installing with standard kitchen units (max. depth
580 mm) and decor panels of max. 2 mm thickness, the
appliance can be set up right next to the kitchen unit.
The door protrudes 34 mm from the side of the kitchen
unit and 51 mm at the front. This enables it to be opened
and closed without difficulty.
W When setting up the appliance next to a wall 4, a mini-
mum distance of 36 mm must be provided on the hinge
side between the appliance and the wall (for the handle
when the door is open).
1 top unit 3 kitchen unit side panel
2 refrigerator/freezer 4 wall
Notes on assembling decor panels*
600 mm wide and 1841 mm high appliances can be
matched or contrasted with your existing kitchen colour
scheme by attaching a decor panel and frames.
The panels are available from your kitchen furniture supplier.
The frames can be fitted later and are available from your
dealer.
If you wish to fit the decor panel yourself, you require a drill
or cordless screwdriver to pre-drill the retaining holes. The
door handles are to be replaced by the rigid handles includ-
ed in the decor frame retrofit set.
For further instructions and dimensions see the installation
instructions included in the retrofit kit.
T
SW5
*
SW5
180°
1
2
3
4
5
7
9
9
8
1
2
3
4
8
8
8
13
15
I
II
20
20
21
21
10
T1
15
13
7
25
25
580
631
614
min. 50
ca. 36
min.
300 cm
2
[mm]
U
A
B
E
F
56,5
C
D
[mm]
S
10
14
*
18
*
31
*
16
*
17
Torx 15
9
25
20
Torx 25
30
32