Liebherr HC1050 Refrigerator User Manual


 
15
HC 1001 / HC 1050
A delight in freshness
INSTALLATION
6. Secure the appliance into the kitchen cabinet.
Note
DO NOT install screw (Fig. 19, 24 / 27) or hinge
spacer (Fig. 19, 23 / 26), at top appliance door
hinge (Fig. 19, 18) if it interferes with kitchen
cabinet door hinge.
a) Place the appropriate hinge spacer
(Fig. 19, 23 / 26) between the
appliance door hinge (Fig. 19, 19) and the
kitchen cabinet wall or cabinet spacer
(Fig. 19, 32):
For 3/4 in. (19 mm) thick cabinet
walls – use small spacer (Fig. 19, 23).
• For 5/8 in. (16 mm) thick cabinet walls
– use large spacer (Fig. 19, 26).
b) Use the appropriate screws
(Fig. 19, 24 / 27) according to the
thickness of the kitchen cabinet walls:
For 3/4 in. (19 mm) thick cabinet walls
– use No. 5 x 75 mm screws (Fig. 19, 24).
For 5/8 in. (16 mm) thick cabinet walls
– use No. 5 x 80 mm screws (Fig. 19, 27).
c) If you are using a cabinet spacer
(Fig. 19, 32) make sure the screws go
through the cabinet spacer.
1918
19
Figure 19
7082132-02_KIKNv_USA.indd 157082132-02_KIKNv_USA.indd 15 2/28/2005 11:06:36 AM2/28/2005 11:06:36 AM