Filter
Top Products
Impinger I – 1000 Series Ops Manual
12
IMPINGER
®
FINGER COLUMNATING PLATES
10. Install finger in the oven by sliding
it over the plenum flange and
setting the front bracket. BE SURE
THAT THE FINGER SETS
SQUARELY OVER THE PLENUM
FLANGES AND THE HOLES
POINT IN THE PROPER
DIRECTION. Top fingers point
down, bottom fingers point up.
11. Repeat step 10 until all eight (8)
fingers are installed.
Install conveyor and crumb pans
before operation. See page 17 for
conveyor installation instructions.
NOTE: Prior to inserting into the oven
opening, slide the conveyor hold-down
clips so the screw head is in the left
side slot, then rotate counter
clockwise to the up position.
12. Attach Motor Cover as shown with
bolts provided.