Filter
Top Products
Impinger II – Digital Advantage Ops Manual –Dom & Int’l
17
FINGER ASSEMBLY REMOVAL (CONT’D)
HOW TO OBTAIN SERVICE
If the oven fails to operate, check the circuit breaker to be sure it is turned on (on a gas oven check the manual gas
valve to insure it is in the “ON” position). In addition, check the fuses on the back of the oven to be sure that they
are good before you call the Authorized Service Agency. The name and phone number of the Authorized Service
Agency should be located on the oven or contact the factory for the name of the nearest Authorized Service
Agency.
2. Grasp top finger housing, lift up from
bracket and pull forward.
3. Grasp bottom finger housing handle and
pull forward, sliding assembly out of oven.
BOTTOM FINGER ASSMBLY
4. Slide finger cover from housing. Lift out
inner Columnating Plate.
TOP FINGER ASSMBLY
5. Reassemble in reverse order. Be sure
finger assembly seats securely over rear
openings.